Flexomarine

Single Carcass Hose FLEXOMARINE Tanker Rail for use to connect the ship’s manifold and the floating hose string
Identified by a double circumferencial white bands at the tanker end
This hose is extremely flexible to support the curvature demanded during offloading
The fittings hose are welded lifting lugs to attach pick-up and snubbing chains
Each lug are tested to support Safe Working Loads as follow:
- (6″ = 40 kN 12″ = 100 kN)
- (8″ = 50 kN 16″ = 150 kN)
- (10″ = 70 kN 20″ = 200 kN)
Rated Working Pressure: 19 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 20% including the weight of ancillary equipment or as requested
Electrical Continuity: Discontinuous or as requested

Nominal Bore (mm)	Outside Diameter (mm)			Weight in Air Empty (kg) Weight in Air Full of Sea Water (kg)			Minimum Bending Radius (m)
	D1 END	D2 Body	D3 END	9.1m (30ft)	10.7m (35ft)	12.2m (40ft)
150 (6")	465	320	520	660 829	742 941	819 1046	0.6
200 (8")	520	430	575	856 1152	966 1314	1069 1466	0.8
250 (10")	640	490	695	1147 1602	1292 1826	1426 2035	1.0
300 (12")	710	555	820	1502 2170	1695 2481	1875 2771	1.2
400 (16")	865	705	1025	2072 3158	2339 3616	2588 4044	1.6
500 (20")	1030	815	1245	2711 4435	3058 5085	3382 5692	2.0

Floating hoses