Flexomarine

Floating hoses

GMPHOM 2009

SUBMARINE SINGLE CARCASS 21 bar 1000 Series

Single Carcass Hose FLEXOMARINE Tanker End Submarine Hose for use to facilitate lifting up the string
Identified by a double circumferencial white bands at the tanker end
This hose is extremely flexible to support the curvature demanded during offloading
In the hose fittings are welded lifting lugs
Each lug are tested to support Safe Working Loads as follow:
- 12″ = 100 kN
- 16″ = 150 kN
- 20″ = 200 kN
Rated Working Pressure: 21 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Electrical Continuity: Discontinuous or as requested

Nominal Bore (mm)	Outside Diameter (mm)		Weight in Air Empty (kg) Weight in Air Full of Sea Water (kg)			Minimum Bending Radius (m)
	D1 END	D2 BODY	9.1m (30ft)	10.7m (35ft)	12.2m (40ft)
150 (6")	255	345	545 173	617 189	685 205	0.6
200 (8")	310	400	709 231	803 252	891 273	0.8
250 (10")	365	465	943 324	1066 353	1181 380	1.0
300 (12")	425	530	1249 465	1414 510	1569 553	1.2
400 (16")	520	625	1718 684	1941 748	2149 808	1.6
500 (20")	630	740	2294 930	2593 1019	2874 1101	2.0

Type 7850F Tanker Rail Hose

Type 7750F Tanker Rail Hose

Type 7650F Tanker Rail Hose

Type 1850F Tanker Rail Hose