Flexomarine

Double Carcass Hose FLEXOMARINE SAFE Reducer Bore for use to connect large mainline hose to smaller tail hose
Rated Working Pressure: 15 bar
Minimum Bending Radius: 6D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 20% or as requested
Electrical Continuity: Continuous or as requested
Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS – Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It’s operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy, futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure

Nominal Bore (mm)	Outside Diameter (mm)			Weight in Air Empty (kg) Weight in Air Full of Sea Water (kg)			Minimum Bending Radius (m)
	D1 END	D2 BODY	D3 BODY	9.1m (30ft)	10.7m (35ft)	12.2m (40ft)
200/150 (8"/6")	470	405	460	784 956	886 1087	980 1210	0.9
250/200 (10"/8")	565	495	555	1068 1367	1208 1559	1338 1738	1.2
250/150 (10"/6")	515	405	460	792 960	894 1091	990 1215	0.9
300/250 (12"/10")	650	575	640	1363 1820	1540 2077	1706 2318	1.5
300/200 (12"/8")	610	495	555	1079 1372	1220 1565	1352 1745	1.2
300/150 (12"/6")	545	405	460	800 969	903 1102	1000 1227	0.9
400/300 (16"/12")	730	640	715	1773 2401	1959 2740	2167 3058	1.8
400/250 (16"/10")	695	575	640	1377 1828	1555 2086	1723 2328	1.5
500/400 (20"/16")	830	790	815	2395 3476	2703 3975	2993 4443	2.4
500/300 (20"/12")	770	640	715	1745 2408	1969 2749	2178 3068	1.8
600/500 (24"/20")	975	935	960	3063 4781	3471 5491	3854 6157	3.0
600/400 (24"/16")	870	790	815	2407 3486	2717 3987	3008 4456	2.4

Double Carcass Hose