Flexomarine

Single Carcass Hose FLEXOMARINE Tanker Rail for use to connect the ship’s manifold and the floating hose string
Identified by a double circumferencial white bands at the tanker end
This hose is extremely flexible to support the curvature demanded during offloading
The fittings hose are welded lifting lugs to attach pick-up and snubbing chains
Each lug are tested to support Safe Working Loads as follow:
- (6″ = 40 kN 12″ = 100 kN)
- (8″ = 50 kN 16″ = 150 kN)
- (10″ = 70 kN 20″ = 200 kN)
Rated Working Pressure: 15 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 20% including the weight of ancillary equipment or as requested
Electrical Continuity: Discontinuous or as requested

Nominal Bore (mm)	Outside Diameter (mm)			Weight in Air Empty (kg) Weight in Air Full of Sea Water (kg)			Minimum Bending Radius (m)
	D1 END	D2 Body	D3 END	9.1m (30ft)	10.7m (35ft)	12.2m (40ft)
150 (6")	520	355	570	849 1018	951 1150	1045 1272	0.6
200 (8")	585	470	640	1152 1448	1296 1644	1431 1828	0.8
250 (10")	705	530	755	1466 1920	1646 2180	1815 2424	1.0
300 (12")	780	595	890	1919 2587	2157 2943	2379 3275	1.2
400 (16")	930	745	1095	2554 3640	2870 4147	3165 4621	1.6
500 (20")	1100	855	1315	3248 4971	3657 5683	4039 6349	2.0

Double Carcass Hose