Flexomarine

Double Carcass Hose FLEXOMARINE SAFE Reducer Bore for use to connect large mainline hose to smaller tail hose
Rated Working Pressure: 19 bar
Minimum Bending Radius: 6D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 20% or as requested
Electrical Continuity: Continuous or as requested
Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS – Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It’s operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy, futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure

Nominal Bore (mm)	Outside Diameter (mm)			Weight in Air Empty (kg) Weight in Air Full of Sea Water (kg)			Minimum Bending Radius (m)
	D1 END	D2 BODY	D3 BODY	9.1m (30ft)	10.7m (35ft)	12.2m (40ft)
200/150 (8"/6")	480	415	470	813 982	920 1119	1020 1247	0.9
250/200 (10"/8")	570	500	560	1065 1361	1206 1554	1337 1734	1.2
250/150 (10"/6")	525	415	470	821 990	929 1128	1031 1258	0.9
300/250 (12"/10")	670	585	660	1415 1869	1600 2134	1773 2381	1.5
300/200 (12"/8")	615	500	560	1076 1372	1218 1566	1351 1748	1.2
300/150 (12"/6")	555	415	470	829 998	938 1137	1041 1268	0.9
400/300 (16"/12")	745	655	730	1767 2435	1997 2783	2214 3109	1.8
400/250 (16"/10")	715	585	660	1429 1884	1616 2150	1790 2399	1.5
500/400 (20"/16")	850	810	835	2469 3555	2795 4072	3101 4557	2.4
500/300 (20"/12")	785	655	730	1775 2444	2007 2793	2225 3120	1.8
600/500 (24"/20")	1000	950	985	3181 4904	3609 5635	4010 6320	3.0
600/400 (24"/16")	890	810	835	2481 3567	2809 4086	3117 4573	2.4

Double Carcass Hose