Flexomarine

Single Carcass Hose FLEXOMARINE Tanker Rail for use to connect the ship’s manifold and the floating hose string
Identified by a double circumferencial white bands at the tanker end
This hose is extremely flexible to support the curvature demanded during offloading
The fittings hose are welded lifting lugs to attach pick-up and snubbing chains
Each lug are tested to support Safe Working Loads as follow:
- (6″ = 40 kN 12″ = 100 kN)
- (8″ = 50 kN 16″ = 150 kN)
- (10″ = 70 kN 20″ = 200 kN)
Rated Working Pressure: 19 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 20% including the weight of ancillary equipment or as requested
Electrical Continuity: Discontinuous or as requested

Nominal Bore (mm)	Outside Diameter (mm)			Weight in Air Empty (kg) Weight in Air Full of Sea Water (kg)			Minimum Bending Radius (m)
	D1 END	D2 Body	D3 END	9.1m (30ft)	10.7m (35ft)	12.2m (40ft)
150 (6")	530	365	585	876 1046	984 1183	1085 1312	0.6
200 (8")	590	480	645	1147 1443	1292 1640	1429 1825	0.8
250 (10")	720	540	775	1519 1973	1707 2241	1883 2492	1.0
300 (12")	790	610	900	1945 2613	2192 2977	2422 3318	1.2
400 (16")	950	760	1110	2626 3711	2959 4236	3271 4727	1.6
500 (20")	1120	875	1340	3363 5086	3793 5819	4194 6504	2.0

Double Carcass Hose