Flexomarine

Single Carcass Hose FLEXOMARINE Tanker Rail for use to connect the ship’s manifold and the floating hose string
Identified by a double circumferencial white bands at the tanker end
This hose is extremely flexible to support the curvature demanded during offloading
The fittings hose are welded lifting lugs to attach pick-up and snubbing chains
Each lug are tested to support Safe Working Loads as follow:
- (6″ = 40 kN 12″ = 100 kN)
- (8″ = 50 kN 16″ = 150 kN)
- (10″ = 70 kN 20″ = 200 kN)
Rated Working Pressure: 21 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 20% including the weight of ancillary equipment or as requested
Electrical Continuity: Discontinuous or as requested

Nominal Bore (mm)	Outside Diameter (mm)			Weight in Air Empty (kg) Weight in Air Full of Sea Water (kg)			Minimum Bending Radius (m)
	D1 END	D2 Body	D3 END	9.1m (30ft)	10.7m (35ft)	12.2m (40ft)
150 (6")	530	365	585	903 1073	1015 1214	1119 1346	0.6
200 (8")	590	480	645	1182 1478	1332 1680	1473 1870	0.8
250 (10")	720	540	775	1566 2020	1760 2294	1941 2550	1.0
300 (12")	790	610	900	2005 2674	2260 3045	2497 3393	1.2
400 (16")	950	760	1110	2707 3793	3051 4328	3372 4828	1.6
500 (20")	1120	875	1340	3467 5190	3910 5936	4323 6633	2.0

Double Carcass Hose