Flexomarine

Single Carcass Hose FLEXOMARINE Tanker Rail for use to connect the ship’s manifold and the floating hose string
Identified by a double circumferencial white bands at the tanker end
This hose is extremely flexible to support the curvature demanded during offloading
The fittings hose are welded lifting lugs to attach pick-up and snubbing chains
Each lug are tested to support Safe Working Loads as follow:
- (6″ = 40 kN 12″ = 100 kN)
- (8″ = 50 kN 16″ = 150 kN)
- (10″ = 70 kN 20″ = 200 kN)
Rated Working Pressure: 15 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 20% including the weight of ancillary equipment or as requested
Electrical Continuity: Discontinuous or as requested

Nominal Bore (mm)	Outside Diameter (mm)			Weight in Air Empty (kg) Weight in Air Full of Sea Water (kg)			Minimum Bending Radius (m)
	D1 END	D2 Body	D3 END	9.1m (30ft)	10.7m (35ft)	12.2m (40ft)
150 (6")	435	305	490	572 742	646 845	714 941	0.6
200 (8")	495	420	550	777 1073	881 1229	979 1375	0.8
250 (10")	615	475	670	1038 1474	1172 1692	1297 1897	1.0
300 (12")	685	535	790	1350 2018	1526 2312	1691 2587	1.2
400 (16")	830	680	990	1853 2939	2095 3372	2320 3776	1.6
500 (20")	1000	795	1215	2468 4192	2789 4815	3087 5398	2.0

Floating hoses