Flexomarine

Single Carcass Hose FLEXOMARINE Tanker Rail for use to connect the ship’s manifold and the floating hose string
Identified by a double circumferencial white bands at the tanker end
This hose is extremely flexible to support the curvature demanded during offloading
The fittings hose are welded lifting lugs to attach pick-up and snubbing chains
Each lug are tested to support Safe Working Loads as follow:
- (6″ = 40 kN 12″ = 100 kN)
- (8″ = 50 kN 16″ = 150 kN)
- (10″ = 70 kN 20″ = 200 kN)
Rated Working Pressure: 21 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 20% including the weight of ancillary equipment or as requested
Electrical Continuity: Discontinuous or as requested

Nominal Bore (mm)	Outside Diameter (mm)			Weight in Air Empty (kg) Weight in Air Full of Sea Water (kg)			Minimum Bending Radius (m)
	D1 END	D2 Body	D3 END	9.1m (30ft)	10.7m (35ft)	12.2m (40ft)
150 (6")	465	320	520	680 849	765 964	844 1071	0.6
200 (8")	520	430	575	883 1179	996 1344	1102 1499	0.8
250 (10")	640	490	695	1183 1637	1332 1866	1471 2080	1.0
300 (12")	710	555	820	1548 2216	1747 2533	1933 2829	1.2
400 (16")	865	705	1025	2136 3222	2411 3688	2668 4124	1.6
500 (20")	1030	815	1245	2795 4519	3153 5179	3486 5797	2.0

Floating hoses