Flexomarine

Double Carcass Hose FLEXOMARINE SAFE One Reinforced End be used in the FPSO Offloading connection
Identified by one circumferencial white band at the reinforced end
The hose can be supplied with reinforcement at both ends or fully reinforced
Rated Working Pressure: 21 bar
Minimum Bending Radius: 6D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 20% including teh weight of ancillary equipment or as requested
Electrical Continuity: Continuous or as requested
Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS – Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It’s operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy, futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure

Nominal Bore (mm)	Outside Diameter (mm)				Weight in Air Empty (kg) Weight in Air Full of Sea Water (kg)			Minimum Bending Radius (m)
	D1 END	D2 BODY	D3 BODY	D4 END	9.1m (30ft)	10.7m (35ft)	12.2m (40ft)
150 (6")	435	340	425	480	952 1121	1084 1283	1208 1434	0.9
200 (8")	500	400	510	570	1241 1537	1412 1760	1573 1969	1.2
250 (10")	575	465	600	670	1626 2080	1846 2380	2053 2662	1.5
300 (12")	645	530	665	740	2067 2735	2351 3137	2618 3514	1.8
400 (16")	745	630	850	875	2783 3868	3163 4440	3520 4976	2.4
500 (20")	865	740	985	1015	3534 5258	4023 6049	4480 6791	3.0
600 (24")	1005	870	1170	1210	4714 7221	5378 8326	6000 9361	3.6

Double Carcass Hose