Flexomarine

Monobuoy / Regular type hoses

GMPHOM 2009

SUBMARINE SINGLE CARCASS 15 bar 1000 Series

Single Carcass Hose FLEXOMARINE Tanker End Submarine Hose for use to facilitate lifting up the string
Identified by a double circumferencial white bands at the tanker end
This hose is extremely flexible to support the curvature demanded during offloading
In the hose fittings are welded lifting lugs
Each lug are tested to support Safe Working Loads as follow:
- 12″ = 100 kN
- 16″ = 150 kN
- 20″ = 200 kN
Rated Working Pressure: 15 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Electrical Continuity: Discontinuous or as requested

Nominal Bore (mm)	Outside Diameter (mm)		Weight in Air Empty (kg) Weight in Air Full of Sea Water (kg)			Minimum Bending Radius (m)
	D1 END	D2 BODY	9.1m (30ft)	10.7m (35ft)	12.2m (40ft)
150 (6")	250	340	519 168	587 184	651 199	0.6
200 (8")	305	395	678 225	767 246	850 266	0.8
250 (10")	360	460	908 318	1025 346	1135 373	1.0
300 (12")	415	520	1169 452	1320 495	1461 536	1.2
400 (16")	505	615	1621 669	1826 731	2019 788	1.6
500 (20")	620	730	2178 912	2457 997	2718 1077	2.0

Type 7835S Tanker Rail Hose

Type 7735S Tanker Rail Hose

Type 7635S Tanker Rail Hose

Type 1835S Tanker Rail Hose